Proxicast Coaxial Lightning Arrester/Suppressor with 75 Ohm F Female Connectors – Pro-Grade Coax Cable Surge Protector for Television (TV) / Satellite Dish Antennas & Cable Internet Use (ANT-271-002)

Product Description

Proxicast Pro-Grade Coaxial Lightning Arrester – 75 Ohm F Female Connectors

230V Discharge Voltage for Maximum Protection

This gas discharge tube lightning suppressor features dual 75 Ohm F-Female connectors, a replaceable gas tube and low signal insertion loss and interference.

It is intended for use with Television (TV), CATV, Satellite (Dish) Antennas and Cable Internet applications.

This arrester is also compatible with 75 Ohm outdoor antennas and cabling using on some 4G/5G Signal Boosters (amplifiers).

Pro-Grade 230V arresters absorb 2.5 times the energy of typical 90V arresters for better protection of your home and equipment.

F-Female to F-Female In-Line Arrester

With dual F-Female connectors, the arrester sits inline with your coax cabling. It passes DC for applications such as remote amplifiers and LNAs. Both ports are equally protected – it can be installed in either orientation. The housing ground lug provides superior grounding.

Protect Equipment, Structures & Personnel

Coaxial lightning suppressors should be installed between outdoor antennas and equipment to protect from high-energy electrical pulses carried through the coax cable either from a direct or nearby lightning strike. Arresters should be installed outdoors as close as possible to the equipment to be protected, typically at the point where the coax cable enters the building.

Key Features Bi-Directional Operation 230V Discharge Voltage Replaceable Gas Discharge Tube Corrosion Free Nickel Plated Brass Construction Low VSWR & Signal Attenuation Grounding Lug

Use 75 Ohm F Lightning Arresters With These Types of Antennas

What Makes Proxicast Lightning Arresters Pro-Grade?

Specifications

Frequency Range 0 – 3 GHz Impedance 75 Ohms Discharge Voltage DC 230V Max Power 200 W Max Discharge Current 10 kA (8/20 μs) VSWR ADGP < 1.2 Insertion Loss < 0.2 dB Connectors F Female / F Female Connector Body Nickel Plated Brass Ground M4 Screw Lug Dimensions 1.9 x 1.0 in (49.4 x 25 mm) Weight 4.5 oz (127.6 g)

Be Safe!

Install arresters away from combustible materials.Weatherseal the coax connections to the arrester.You must connect the ground screw of the arrester to an earth ground such as:The ground rod tied to your building’s electrical panel.A water utility pipe that enters the building.A new copper ground rod that you drive yourself.Use #10 AWG (or thicker) copper ground wire between the arrester and ground point.Consult your local building code for other grounding and safety requirements.

You May Also Need

X-Boom Antenna Mast Cross-Over Bracket

Add additional antennas to your existing outdoor mount with our X-Boom Cross-Over bracket. No need to drill more holes in your siding or roof just to add another antenna.

J-Max Antenna Mounting Arms

Proxicast’s professional grade ANT-800-JP3 J-Max adjustable antenna mounts feature extraordinary strength and premium materials. Available in stainless steel and rust-proof aluminum, these mounts will last a lifetime.

Coax Weathersealing Silicone Tape

If moisture gets into the cabling it can create intermittent shorts and permanent damage. Seal all outdoor connections with our ANT-900-002 Pro-Grade Coax Silicone Sealing Tape.

DESIGNED FOR TV, SATELLITE, AM, FM and CABLE TV/INTERNET USE – Features F-Type Female Connectors
COMPATIBLE WITH 4G/5G SIGNAL BOOSTERS that have 75 Ohm Outdoor Antennas
BI-DIRECTIONAL PROTECTION – High Quality Construction – Outdoor Rated – Suitable for In-Line Use
VERY LOW RF INSERTION LOSS (Signal Attenuation) – 75 Ohm Impedance – DC Pass-Through
230V GAS DISCHARGE TUBE – Coaxial Cable Surge Protector with Multi-Strike Capability Shunts Damaging Surges, Transients, and Lightning Energy to Ground
CONNECT COAXIAL SURGE PROTECTOR to Antenna Signal Feedline and Earth Ground